Double/Single Skin Floor Mounted Air Handling Unit

AIRFLOW ENGINEERS' Horizontal Floor Mounted Air Handling Units are available in various specification and size, airflow ranging from 800 CFM to 35000 CFM. The nominal cooling capacity varies from 2 TR to 30 TR functioning in the range from static pressure 50 mm to 150 mm.

Floor Mounted Air Handling Units are available as:

1. Chilled Water-type A.H.U: Comprising Chilled Water Cooling Coil (Having copper tube diameter of 1/2 inch)
2. Direct Expansion(DX)-type A.H.U: Comprising DX Cooling Coil (Having copper tube diameter of 3/8 inch)

These A.H.Us are further available in either of the following forms:

1. Single Skin A.H.U: Fabricated out of 1.2/1.6 mm thick GI sheet which is then powder coated to prevent corrosion and rust formation.
2. Double Skin A.H.U: Fabricated out of 0.6 mm thick GI sheet and 0.6 mm pre-coated sheet within which high-quality PUF is injected for enhanced insulation providing the panel a thickness of 25/35/40/45 mm as required.

Salient Features of AIRFLOW Single/Double Skin Floor Mounted A.H.U

• High-quality designs at affordable prices
• Fan and Motor assembly are mounted on a common base frame which is fabricated out of extruded Aluminium Profile with anti-vibration pads.
  
• Machines are provided with AMCA Certified DIDW centrifugal blowers which are either belt-driven or driven directly.
• Provision of installing DX/CW Cooling coil, made of a high-quality copper tube with aluminum fins to achieve the maximum efficiency.
• Machines are fabricated using powder coated GI sheets to prevent corrosion which provides them longevity.
• Provision of easy removal/change of Pre/Micro/HEPA Filters as required by the client
• Provision for installing a mixing chamber/bleeding port available which is customized as per the need of the client

APPLICATIONS OF FLOOR MOUNTED A.H.U.

Dimensions/specifications are recommended by R&D dept for better performance and efficiency of the equipment which can be changed during the process of fabrication with prior intimation to our valued clients. Any changes in specification, if suggested by the client during the process of fabrication, can be considered on request.